Woodworking Machinery
..The Equipment Experts

SCM Si400e panel saw 3200mm
Technical Specification:
- squaring capacity with extended stop:
* with 2200 mm carriage 2200X2500mm
* with 3200 mm carriage 3200X3200mm
* with 3800 mm carriage 3800X3200mm
- blade tilt 45degrees
- max. cutting height at 90 degress 130mm
- max. cutting height at 45 degrees 92mm
- blade speed 3000-4000-5000rpm
- scoring unit speed 8500rpm
- diam. of exhaust outlet at base 120mm
- main motor power 7.5hp
- scoring unit motor power 1hp
STANDARD EQUIPMENT :
- aluminium alloy carriage sliding on high precision "arch-formed" hardened
steel guides, which are fixed on the carriage by means of mechanical
bending system
- squaring frame complete with mobile aluminium bar for the fast fence
positioning for angular cuttings
- independently powered scoring unit with external setting up and stops for a
quick re-positioning of the blade
- rip fence with sliding system 50 mm diameter bar, with micrometric
adjustment
- eccentric clamp;
- table extension on exit side
- overload switch protection
- auxiliary low voltage circuit (110 volts)
- direct start main motor
- 2-axiselectronic postioner for saw blade lifting and
tilting selectable by means of numerical keyboard
and displayed on electronic digital readouts
memory capacity up to 300 working programs
function to assist stop positioning on the squaring
fence,essential to carry out cuts with tilted table
and/or angular cutting on the worktable.
- overhead saw guard with incorporated dust extraction
100 mm diameter
- blade access door with safety microswitch and
quick locking
- emergency pushbuttons located on the front machine
side and on parallel fence side
- automatic brake on motor
- compact squaring frame with fence
- ripping capacity on parallel fence of 1000 mm
- certificate of conformity with "C.E. Standards"
36.14.06 Upper mobile control panel
easy to reach by the operator
N.B. (available only for E version)
95.11.06 Motor start/stop pushbuttons
integrated in the sliding carriage for saw and scoring
blade
57.00.13 Parallel fence electronic programmer with THK guides
controlled axis, complete with:
- memory capacity up to 300 working programs
- programming of sequential measures for the execution
of maximum 6 cuttings, with a single program
- electronic readout of loaded working measures.
- sliding on two precision prismatic guides by means of
recirculating ball screws pads
- movement through recirculating ball screw,
25 mt/min max. speed
- exclusion of fence under worktable
- presence detection system for the automatic change of
fence position, according to the used fence profile
(high or low)
- cutting width on the parallel fence, 1500 mm
N.B. (available only for "E" versions)
57.00.44 Device for angular cutting
with self-adjustment of the stop positon in respect of the blade, irrespective of the angles used, complete with aluminium fence with stop for sizes up to 1500 mm
57.00.42 Squaring fence with LCD readouts for stops position
Device equipped with no. 2 mobile stops on the fixed fence part and no. 1 fixed stop on the extended part.
Each stop is equipped with electronic digital readout with detecting system on magnetic band and readout on LCD display
N.B. (not available for versions with 2200 mm carriage)