Woodworking Machinery
..The Equipment Experts

K203 Compact single sided automatic edge bander with inverter
Compact for maximum efficiency in small spaces
High precision of end cutting equipped with 2 independent motors with sliding on prismatic guideways
Production with high versatility because the hot melt gluing system allows the use of all types of edges
Efficient processing thanks to the minimum distance between two panels .
Features:
Base structure made of high rigidity tubolar steel to guarantee an excellent
support for the operating units and the feed
Control panel on presser infeed
PANEL MOVEMENT SYSTEM:
- feed track made of pads coated with high friction rubber fixed on an industrial chain.
The track runs on two cylindrical guideways (in ground and hardened steel), one round and one flat, to ensure straightness of movement and resistance to side loads
- top steel presser fixed on two solid columns complete with rubber coated wheels with bearings for a secure clamping of the workpiece and a smoth and precise movement
- manual adjustment of top presser with automatic positioning of the operating groups according to the panel thickness
- mechanical digital indicator of the selected panel thickness
The machine is complete with:
- INVERTER
- infeed and outfeed emergency pushbottons
- centralized dust extraction
- support rollers which can be extended according to the panel dimensions
- safety protection of the edge loading area and safety enclosure of the groups
- padlockable main switch and overload motor protection
- low voltage auxiliary circuit (110 v.)
The operating groups installed in the different compositions are indicated in the
attached schemes
OPERATING GROUPS
GLUE POT UNIT EDGE, LOADING AND PRESSURE SYSTEM:
quick heating glue pot (for hot-melt glue) internally teflon-coated to allow an easy and quick glue replacement
- glue application on the panel by means of glue spreading roller
- digital thermostat to control the temperature of the applied glue
- device for the automatic recovery of unused glue
- automatic edge loading system for rolled edges with shear device for edges with maximum thickness of 1,2 mm and edge saving device to reduce the edge material waste- two edge pressure rollers.
The first roller is powered and with clutch unit. Both are equipped with mechanical pressure adjustment.
- pressure rollers adjustment outside the safety cabinet
- nr. 1+2 pressure rollers with pneumatic pressure adjustment. The first roller
is powered and with clutch unit, the second and the third have counterposed conicity to guarantee a perfect adhesion to the applied glue
- automatic edge loading system for strips and rolled edges
- glue spreading roller with dedicated heating element
- automatic lowering of the glue pot temperature after a temporary non-use
of the machine
END CUTTING UNIT with two independent high frequency motors for the
trimming of the front and rear exceeding edge.
Tiltable motors with manual adjustment from 0 to 15 degrees without utilizing
any type of spanners.
High precision and reliability of end cutting unit thanks to the sliding
of the two motors on prismatic guideways and linear sliding pads with
preloaded recirculating balls.
Each operating motor is equipped with copying device for an accurate
positioning of cutters with reference to the cutting point.
Pair of cutters included
TRIMMING UNIT with two independent high frequency motors mounted on a
support and strongly fixed to the unit support frame to carry out the
trimming of the top and bottom exceeding edge.
Maximum working precision thanks to the vertical and horizontal sliding of
motors on hardened and grounded bars with recirculation ball bushings.
Each motor is equipped with vertical and horizontal copying pads for an
accurate positioning of tools with reference to the cutting point.
The unit is equipped with conical cutters or R=3mm according to the
compositions choosen.
Technical Specification:
COMP. A
- working height during trimming 8 - 40mm
- thickness for rolled edges 0.4 - 1.2mm
ON REQUEST 0,4-3 mm ------
- thickness for edges in strips 0.4 - 5mm
- minim. PANEL width with rolled edges 65mm
- minim. PANEL length with rolled edges 140mm
(minimum width 200 mm)
- Distance between two succesive panels 500mm
- glue pot unit
* absorbed power 2.4kw
* glue capacity approx. 1kg
- end cutting unit 12000 rpm - 200 hz:
* motor power (each) 0.35kw
- feed motor power 0.55kw
- track feed speed 10.5m/min
- installed power "A" comp. 4.6kw
Dimensons 2475 x 956 x 1275cm