Plano Clamp System - Seamless glued surfaces - Plano glue press..
Plano four way glue press cannot be compared to anything else. Patented internal linkage system guarantees that equal pressure is applied to all four sides of the work project at the turn of a handwheel. All gluing problems, such as warping or blowing and unilateral stretching are eliminated. If you want perfect gluing results you have one choice - Scheppach Plano.
Now you can convert separate parts into one large flat, seamless surface just as though they were made from a single piece. The pressure point is always at the centre of the workpiece and the pressure - up to 800kp - is evenly distributed on all sides.
Use the wall as your working surface. The Scheppach Plano glue press is wall mounted and therefore saves you space. With two presses mounted on the wall rail you can perfectly glue pieces together up to 800mm in length. For longer lengths just add the number presses and wall rails according to your work requirement.
Standard equipment Patented lever arm system made of aluminium and steel. Max pressure 800kp.
The patented lever system guarantees that equal pressure is distributed on all four sides of the workpieces.
Plano 1100 start set Including 3 adhesive presses, 1 wall-mounted slide rail 35mm (L) x 130mm (W) x 1,120mm (H). Maximum workpiece height 1,050mm, thickness 120mm. Maximum workpiece length 1,200mm. Order No. NM89930102
Plano 1100 Supplementary Set Including 2 adhesive presses, 1 wall-mounted slide rail. Maximum workpiece length 800mm. Order No.NM89930101
Accessories Wall Mounted Rail 1000mm for both models. Order No. NM89932000
Fast and easy Saves wood Less work with the finish Easy to handle Saves valuable workshop space Stronger joints Always the right pressure Unlimited length
Furthermore ...PLANO is an excellent edge clamp. With the help of a stiff board PLANO is also a good alternative for veneering shelves and tabletops on a smaller scale. A perfectly balanced pressure across all four surfaces guarantees optimal results.
The vertical alignment is space-saving, and prevents the glue from sliding to one side of the joint.
The patents also cover the functions of the spring-equipped hooks, which are attached to the ends of the arms. They simplify the movement of the lower stop in both directions and lock safely in the punched holes of the sidebars. It is more or less impossible to create equal pressure on the entire surfaces when using conventional sash#clamps, or any clamps which only clamp in one direction. Clamping from both sides works only if the boards are very thick. PLANO always exerts the same pressure on both sides of the joint, because the pressure is centred in middle of the wood, regardless of the thickness.