For cutting tiles and a number of other building materials; ceramic, natural stone and composite material, interior and exterior tiles.
The depth of a building tile cut with this saw range from 20mm to 60mm . Due to the fixed head and patented sliding bed the D24000 is extremely easy to use. Whether rip, bevel or plunge cutting the saw is quick and easy to adjust and extremely accurate.
Due to its fixed head and removable water trays and legs the saw is compact and lightweight to transport.
Stainless steel rail system is intergrated into the tile saw frame, ensuring accurate cuts Cantilevering rail / cart sytem allows for 610mm ripping capacity Relatively low weight allows one person to transport and set up saw Intergrated 45 / 22.5 degree feature for quick angle cuts Plunge feature allows the user to make quick plunge cuts for electrical outlets Dual water nozzles can be adjusted for optimal water placement on the blade in order to minimise over-spray and mist Rear and side water attachments can be placed on the tile saw to catch overspray - keeping the water in the pan Removeable cutting cart for easy cleaning of tile saw Edge guide with two positions (90 & 45 degree) allows easy line up of corner cuts
Includes: Cutting disc, Extention table, Side and rear water collector, Hex key
Features: Cantilevering Rail/Cart system allows for 24" ripping capacity - 18" tile on diagonal Only 69 lbs - allows one person to transport and set up tile saw Stainless steel rail system is integrated into the tile saw frame, insuring accuracte cuts Integrated 45/22.5° miter feature for quick angled cuts Plunge feature allows the user to make quick plunge cuts for electircal outlets and A/C registers Dual water nozzles can be adjusted for optimal water placement on blade in order to minimize over-spray and mist Rear and side water attachments can be placed on tile saw to catch overspray from large tile - keeping the water in the pan Removeable cutting cart for easy cleaning of tile saw Compact tile saw frame allows for easy transport and storage in vehicle - 34" x 26" 3-3/4" depth of cut allows for cutting of V-cap and pavers Powerful 1.5 HP motor will cut hard materials such as porcelain and stone 5 gallon water pan allows for quick tile saw set-up and break-down Edge Guide with 2-position 45 degree guide allows for easy line-up of corner cuts. Warranty Information
Amps 15.0 Amps Blade Diameter 10 " Tool Weight 69 lbs Max Rip Capacity 24" Tile " Diagonal Cut Capacity 18" Tile " Plunge Feature Yes Max. Depth of Cut 3-3/4 " Integrated 45 Degree Miter Yes Integrated 22.5 Degree Miter Yes Length 34 " Width, Housing Only 26 " Edge Guide 45/90° Pan Material ABS Plastic Stand Included in D24000S Removeable Water Containment Tray Yes Position of Rail System Integrated Horsepower 1.5 Continuous Duty HP