Woodworking Machinery
..The Equipment Experts

CENTAURO T7E 2000 COPYLATHE
The Centauro T7e is a heavy duty automatic copy lathe using 2 hydraulic copiers with electronic control of the cycle. The copiers operate simultaneously making it ideal for profiling at greater depths or faster copying speeds.
Features:
* Saddle movement using recirculating ball screw
* 2 hydr. copiers with cobalt gouges R. 0,6 and 3,5 mm
* Automatic work cycle acquisition with elect. control
* Hydraulic tailstock with controllable pressure
* Double pass on finishing copier
* Revolving steady D. 90 mm (65x65 mm square)
* Reduction bush for revolving steady D. 90 mm
* Revolving steady D. 140 mm (100x100 mm square)
* Reduction bush for revolving steady D. 140 mm
* Precutting insert knife
* Revolving tailstock centre D. 12 mm
* Driving centre with 2 interchangeable jaws D.28 & 45mm
* Precutting tool for rounding
* 2 manual vertical slides c/w back knifes for dowels
* Automatic cycle using 2 hydraulic copiers operating simultaneously.
* Possibility to program a second automatic pass of finishing gouge for heavy-duty work.
* High-sensitivity hydraulic copiers that permit use of timber masters and templates.
* Two-gouge turning (one for roughing and one for finishing) for heavy removal jobs.Any profile can be cut without the need for profile tools.
* Extremely solid ribbed steel base and headstock to guarantee complete absence of vibration.
* Ground bed angled to minimise dust abrasion.
* Hydraulic saddle advance.
* Hydraulic tailstock with controllable pressure.
* Automatic workpiece centring system interlinked to tailstock.
* Vertical back knives for dowel cutting.
* Automatic work cycle acquisition with electronic control capable of storing upto 5 different cycles.
* Infinitively variable, programmable saddle feed speed.
Technical Specification:
Max. distance between centres mm 2000
Height of centres over bed mm 226
Max copying diameter mm 250(178)
Max ¥ permitted by small steady mm 90(65)
Max ¥ permitted by large steady mm 140(100)
Diameter of tailstock sleeve mm 60
Sleeve travel mm 100
Connection for driving and tailstock centre3 C.M.
Programmable saddle feed speed mt/min 0 - 12
Saddle return speed mt/min 12
Spindle speed g./min
Spindle motor power HP/CV/kW 4-5
Motor power of hydraulic unit HP/CV/kW 1,5/1,1
Transformer power for saddle feed motorkW 2
Installed power kW 7,1
Operating pressure bar 25
Stroke of copying unit mm 150
Max. depth of 2nd pass mm 30
Dust extraction mm N°2¥ 100
Noise level at operator position dB (A) 80
Net weight kg 1600
Packing sizes mm 3950x800x1550

STANDARD EQUIPMENT

 Revolving steady for max. 65x65 mm square with reducing bush.
 Revolving steady for max. 100x100 mm square with reducing bush and pre-cutting tool that has interchangeable knife inserts.
 Drawing tool support.
 Pre-cut tool for rounding 20x20x100 mm.
 Drive centre with interchangeable jaws ¥ 26 and 45 mm.
 Revolving tailstock centre with 12 mm ¥.
 2 Tantung gouges, radius 0,6 and 3,5 mm.
 2 Vertical mechanical saddles complete with tools for dowel pins (1 right - 1 left).
 1 Dust extraction collector ¥ 100 mm.
OPTIONAL

 Self-centring steady with 4 jaws for square workpiece min. 30x30 max. 60x60 mm.
 Self-centring steady with 4 jaws for square workpiece min. 60x60 max. 90x90 mm.
 Revolving steady for curved workpieces.
 Device for a second automatic pass of roughing gouge too.
 Hydraulically controlled vertical saddles.
 Bushing for revolving steady.
 AG125 gouge grinder.
 Drive centre ¥ 20 mm with 4 jaws.
 Reinforced drive centre ¥ 45 mm with 6 jaws.
 Reinforced revolving tailstock centre ¥ 48 mm.
 Cobalt gouges (radius 0,6 mm 1,2 mm 3,5 mm).