Woodworking Machinery
..The Equipment Experts

A high spec edgebander for applying veneer, pvc coil and thin solid wood strips to the edges of panels. Because of the corner rounding unit the thickness of board is restricted to 45mm thick. Track pads are in good condition,
Technical Specification:
Model 1424
Serial number 652/0-004
Year of manufacture 2000 CE
Max thickness pvc edging 3mm
Max thickness solid wood strip 8mm
Max workpiece thickness pvc 45mm max
Max edging height 50mm
Workpiece feed speed 12-16 m/min
Feed motor power 1.8 / 2.6kw
Min workpiece length 140mm
Machine weight 1450kgs
Machine dimensions 6300x1400x1700mm
Pre milling cutter heads
------------------------
Two PCD diamond tipped cutter blocks
Glueing station
----------------
Cartridge type
Glue applied via flat nozzle with electro magnetic control,
Hot melt glue cartridge 63mm dia x 80mm long
Heating up time is less than 5 mins,
Working temp 180c - 240c
Cartridge magazine capacity 4
End trimming unit
------------------
Tct sawblade 110mm dia 22mm bore
Max solid wood thickness is 13mm
Min workpiece length 140mm
Flush trimming unit
---------------------
Top and bottom , up-cutting with tracing, swivels from 0-15 deg.
Max width of cut is 13mm
Max edge surplus is 3mm
Profiling units
----------------
For rounding over edges with 2/2.5/3mm radius
Capable of tilting 0-15 deg
Max edge projection top and bottom is 3mm
3 knife cutter blocks
Scraping units
---------------
Fitted with 3mm rad knives
Corner rounding unit
--------------------
Designed to machine the front and rear edges of the workpiece as wall as the upper and power corners as the panels are being fed through the machine. Profiling is also possible using profiled knives. The corners can be raised, bevelled or flush. Max workpiece thickness is 45mm, minimum length of workpiece is 140mm, max feed speed is 12 m/min, max machining width is 3mm, for use with melamine, pvc and abs
Top and bottom buffing
--------------------------
Swivelling heads to 45 deg, max edging height 60mm