SCM Compact NT5 Automatic Through-Feed Planer Moulder
The completely reengineered Compact NT is ideal for small to mid-sized companies. It combines precise planing and moulding of architectural mouldings, cabinet components and furniture parts in one pass. Minimum set up time is provided with the unique "Quick Set" setting system.
The four side planer is the most cost effective and safest way for furniture and joinery workshops to produce straight planed and profiled timber, in one pass giving a great time saving. This machine will plane on 4 sides and mould on 4 sides up to 230mm wide and 120 mm thick. A very cost effective machine in the modern production workshop where speed and safety are important. Supplied as standard with four cutterheads.
The Compact NT is available either as a standard machine or the E version has a programmer for automatic width and thickness setting. Features: ................................................................................................................ All controls and adjustments are located up front for ease of set up. The top horizontal chip-breaker and pressure shoe have been redesigned for superior material control & surface finish. - Four sided planing and moulding in one pass - Ergonomic design with all controls up front for easy access - Redesigned chip-breaker, pressure shoe and spindle for improved finish and material control - Monoblock steel construction with cast iron components - Motor brakes, variable speed feed and central lubrication are standard
Technical Specification: - minimum working width (finished section) 25 mm* - maximum working width (finished section) 230 mm** - minimum working thickness (finished section) 6 mm*** - maximum working thickness (finished section) 120 mm - minimum length of single component (composition 1) 450 mm**** - minimum length of single component (composition 5) 635 mm***** - feed speed 6-12 m/min - feed motor 1,3/1,7 HP) - motor of planer spindle 7,5HP - motor of vertical spindles 15HP - motor of top and bottom horizontal spindle 10HP - spindle speed 6000rpm - diameter of spindles 40mm - working length capacity of vertical spindles 140 mm - working length capacity of horizontal spindles250 mm - universal spindle length 240mm - axial adjustment of vertical spindles in relation to worktable 40mm - axial adjustment of horizontal spindles in relation to the right fence 40mm - min/max tool dia on surface planer 120 - 140 mm - min/max tool dia on vertical spindles 100 - 180 mm - min/max tool dia on top horizontal spindle 125 mm****** - minimum/maximum tool diameter on bottom horizontal spindle 100 - 180mm # profiling capacity with tool diameter 180mm 15mm - minimum/maximum tool diameter on universal spindle 100-180mm - feed roller diameter 140mm - in feed table length (straightening capacity)2000mm - rapid adjustment of in feed table and fence 0 - 10 mm - hardened insert placed on worktable before planer spindle STD - 2 feed rollers 140x25 mm for each feed hub STD - tools excluded
* 15 mm with relative optional ** 437 mm with relative optional *** 425 mm with relative optional ****** 100-180 mm with relative optional
Machine equipped for UK market with: Kit for enabling profiling with the top spindle - min/max. tool diameter 100-180 mm - axial stroke 40 mm - 2 mechanical decimal readouts Powered rise & fall of feed system through switch placed on the front of the machine Manual lubrication pump for worktable Second flanged feed roller opposite left vertical spindle, width 20 mm Kit of supplementary flanged feed rollers in front of left vertical spindle - 2 steel feed rollers, 20 mm wide - 2 distance rings, 40 mm wide Kit of planer cutterheads and reference engraver - reference engraver diam.150x40 mm with 2 knives - 2 planer cutterheads for horizontal spindles diam.125x235x40 mm with 4 knives - 2 planer cutterheads for vertical spindles diam. 125x135x40 mm with 4 knives - Preset 25 measurement device - European safety regulations (CE norms) - UK Commissioning and instruction by SCM technician
Machine bed The machine bed is of thick steel with strongly ribbed structure and tubular supporting base.
Worktables The tubular steel in feed worktable has a parallelogram system for vertical adjustment and is fitted with a hardened insert placed before planer spindle. Worktables are of hardwearing special cast iron with a low coefficient of friction and are equipped with removable inserts in front of the vertical spindles.
Fences The right in feed fence has a parallelogram system for width wise adjustment through reference engraver (tool not included). Right fences with easily adjustable sectors for correct positioning according to the tools used.
Spindles The spindles have a hardened surface to avoid wear. The 100 mm diameter steel spindle barrel ensures the maximum stiffness and precision even during heavy duty machining.
Feed system The beam which supports the feed system is of a tubular ribbed structure and is provided with manual rise & fall movement (can be powered on request). The feed system has 2 speeds. On request, variable is available which is continuously adjustable from the operator position through a step less gearbox. A powered roller placed on the out feed table improves feed when dealing with particular machined sections. Spindles and feed rollers are made of steel with hardened surfaces.
"SET UP" quick adjustment system It is a patented, exclusive SCM device allowing very easy and quick setting-up with every tool change. The right and left vertical spindles (on request also top horizontal spindle) are equipped with the "SET UP" quick adjustment system, which allows the set-up of the machine in one single step. It is enough to set the minimum diameter of the tool (in the case of a top horizontal spindle), and the tool itself, working thickness, front/rear pressures, feed rollers are automatically adjusted.
Positioning of working units Adjustment of working units are controlled from the machine front with mechanical digital readout of position. Work piece section is displayed on mechanical decimal readouts placed on machine front.
Ergonomics All controls are placed on the front of the machine at a suitable height for easy use. The integral protective enclosure ensures low emission of noise and dust guaranteeing a full view of the machine at the same time.
