Features: The serie FC double copying-shaping and sanding machines are suited for milling and sanding components of chairs, armchairs, sofas, tables, beds, frames, with the best finish and highest output.The units' feed can take place in the direction perpendicular to the table, or inclined direction not perpendicular. This second option allows a perfect execution of round-end profiles, with high output and without reducing the table feed speed to unacceptable values, or even without stopping it. Within the FC range versions can be supplied with 2, 4 6 or 8 heads units are available.
Features: - Table feed driven by hydraulic control with variable pressure. - Units feed in perpendicular direction to the table or inclined: this second possibility allows to machine perfectly round end profiles. - Table sliding on ground steel bars by selflubricating bronze bushings. - Working units sliding onto "heavy" ball bushings.
FC2 MACHINE EQUIPPED WITH :
- 1+1 cutting unit with 10 hp motors - 6 Pneumatic clamps
Technical Specification: - Max. working length with rounded end mm. 2500 - Max. working width mm. 500 - Max. working width with rounded end mm. 350 - Max. working height mm. 180 - Variable table feed spe m/min 0,2 - 15 - Spindle speed rpm 8000 - Diameter of cutter-holder mm. 35
