Woodworking Machinery
..The Equipment Experts

BRANDT 'KD-84-C Optimat' Single Sided Edge Bander
Serial No. 0-261-03-7042
(1996)
with CNC Control
BRANDT EDGEBANDING MACHINE OPTIMAT KD84 - CONTOUR SERIAL NUMBER: 7042
Single-sided edge bander in right hand execution for hot melt gluing, particularly designed for craftsmen' enterprises.
VKNO: 2030 Quick Melt Gluing Unit for Hot Melt Granulated Glue.
For premelting container as well as quickly changeable gluing unit with a low volume.
Glue reservoir underneath the glue roller, therefore avoiding the possibility of spillage into the machine.
Glue application to the workpiece by means of glue roller.
No adjustment of the glue roller is required when changing the workpiece thickness.
The glue roller can be selected to rotate with or against the workpiece feed direction.
Glue temperature control by means of electronic thermostat.
Hot melt glue activation by means of infrared heater. Automatic edge magazine for coiled
material and fixed lengths including roller plate diam. 800 rom.

Equipped with heavy duty guillotine for cutting thick PVC/ABS from the coil max. 3 x 45 mm.
Standard equipment with edge and panel distance control with optic indicator.
Heavy pressure zone with driven, pneumatically actuated main pressure roller and three idle post
pressure rollers.
Standard equipment with central lubrication of chain track by hand.
Central adjustment oftop pressure beam.
Tiltable control panel at machine infeed.
Integrated line control for controlling the different working functions. To be adjusted by means
of a key board and LED display.
Electric equipment with a new modular control system for increasled operator's comfort and easy
servIce.
Prepared for later mounting of a panel return system, type "Ligmatech Boomerang".
Admitted temperature tolerance min. + 5 degrees max. + 35 degrees C.
Technical Specification:
Edge thickness 0,4 - 12 mm
coil cut-off max. 3 x45 mm
0,8 x 60 mm.
Workpiece thickness 10 - 55 mm
Workpiece width min. 65mm
Workpiece length mm. 160mm
Feed speed 13 m/min.
Electrics 400 V - 3 phase - 50 Hz + Neutral ·
Air connection 7 bar
Conn. value approx. 9 kW
Total machine length 5500 mm
VKNO: 3130 End Trimming Unit Chamfer/Straight 2 x 0,35 kW.
For end trimming of the front and rear edge overhang with drawing cut for a
high degree of accuracy.
Edge dimensions: max. 12 x 40 rom
max. 3 x60mm
2 motors each 0,35 kW, 200 Hz, 12,000 rpm.
Swivelling range straight to chamfer trimming 0 - 15 degrees,
equipped with 2 end trim saws diam. 100 x 32 x 2,6 rom, T = 30.
VKNO: 4130 Trimming Unit 2 x 0,55 kW, 0-25 degrees.
For flush trimming of the top and bottom edge material overhang.
2 motors mounted side by side, vertical and horizontal sensing,
lateral manually movable.by 30 rom.
Height adjustment of the upper motor with the top pressure. .
Digital counter for fast adjustment.
Edge thickness max. 12 rom
Workpiece thickness 8 - 55 mm
Swivelling range 0 - 25 deg.
Standard equipment with: 2 off reversible cutter heads 70 x 12 x 16 mm, T = 4.
VKNO: 4196 Pneumatic Adjustment Trimming/Scraping
for the electro-pneumatic axial movement of flush trimming and scraping units
to manual 8-fold revolving stops. In case of a push-button control, the complete
unit adjustment is being carried out.
Individual adjustment top or bottom only possible in combination with the electronic
control system BS03 (VKNO 6710).
VKNO: 4801 Contour Trimming Unit Top/Bottom 2 x 0,4 kW
for copying of head edgings on post- and soft-forming workpieces or rounded comers at
workpieces with a 4-sided-gluing of thick PVCedge material. Processing of wooden edgings
depend on trials. Either radius or chamfer cutters can be mounted (exchange device).
3 working methods:
1. After rounding off the edges, the units must
be stopped to get the measure for the scraping procedure
2. Rounding of edges and radius trimming top/bottom
without scraping procedure afterwards.
3. Individual processing of the edges top and
bottom, front and rear
(Only in combination with BS03)
VKNO: 5735 Scraping Unit for PVC edgings
Sensing from top, bottom or, laterally. For chamfering or rounding off pre-trimmed
PVC-edges. Max. edge thickness 3 mm. Height adjustment of top unit by means
of top pressure, incI. 2 reversible profile knives r = 3mm
VKNO: 5445 Buffing Unit - 2 motors
for smoothing the edges top and bottom. 2 motors individually suspended 0.09 kW
each, laterally and height adjustable. Height adjustment of the upper motor with
the top pressure. 2 molton discs diam. 120 x 20 mm