Designed for calibrating and finishing solid wood board and veneers in one pass,
Fitted with powered jacks at the base of the machine allowing the machine to be raised or lowered when used in line.
The machine is in very good condition.
Pneumatic adjustment to the top pressure bar, very good condition feed mat, floating table for use when sanding veneers, powerful motors, two helical grooved rubber coated callibrating rollers followed by a pad and then a blower to clear the grain of the wood.
Mechanical digital readout for the working thickness,
Blowers on each sanding belt to clear the belt,
Taster device,
Rotating brush fitted under the feed mat to clean belt,
Vacuum hold down table,
Technical Specification:
Model TKKS 1300
Serial number 93034817
Head configuration
roller,roller, pad,blower
1st motor power roller 25hp
2nd motor power roller 25hp
3rd pad 20hp
Blower
Max width of board 1300mm
Max opening 110mm
Belt dimensions 2620x1340mm
Feed speed (variable) 2-18m/min
Calibrating roller dia 270mm
Rise and fall of table powered
Main extraction outlet 400mm dia
Blowing unit extraction 120mm dia
Overall dims 2400x2600x2300mm